Common Sources Of Water Damage in a Bathroom

Call Us Today

We've found this post involving How to Prevent Bathroom Water Damage down the page on the net and felt it made sense to write about it with you on this site.


How to Prevent Bathroom Water Damage
The restroom is exceptionally susceptible for wet build-up and possible water damage as a result of the regular use of water in it. This post provides simple evaluation strategies to assist detecting water damages dangers.
The constant use of water in the restroom makes it exceptionally prone for wet build-up and prospective water damages. By examining it consistently, you can decrease water relevant damages.
The complying with set of assessments is easy to do and ought to be done as soon as in every three months in order to maintain your bathroom in good shape and also to prevent prospective water problems triggered by the bathtub, the shower, pipe joints and also plumbing, sinks, cabinets, as well as the toilet
Do not overlook executing these evaluations as well as be detailed while executing them. Keep in mind that these easy inspections can save you a great deal of money by supplying very early signs for water damage

Bath tub and also Shower


The shower and tub call for special interest as well as upkeep. Check the ceramic tiles and also replace if broken. Make certain that there is no missing out on cement between the tiles. Check and also change cracked caulking at joints where the walls satisfy the flooring or the bath tub. Clogged drains as well as pipelines troubles will certainly prevent the bathtub from drying and may suggest severe troubles beneath the bathtub. Speak with an expert quickly to stop architectural damage. Take note of discolorations or soft areas around the tub wall surfaces as they might show an inner leakage.

Plumbing


Signs for water damages are hard to spot because many pipes are set up inside the wall surfaces.
Pay special focus to floor covering and also wall surfaces dampness and also discolorations as they might show an invisible plumbing trouble. Examine dampness levels in adjoining spaces also.

Sinks as well as Cabinets


Sinks as well as cabinets are exposed to moisture and humidity day-to-day as well as are usually forgotten. Evaluate consistently under the sink and also on the kitchen counter over it. Fix any type of drip in the trap as it may recommend drainpipe issues. Take a look around the sink, sluggish draining pipes may show an obstructed drainpipe. Change sink seals if they are split or loose.

The Toilet


The toilet is an at risk water joint. Inspect the water lines as well as search for leakages around the commode seat, in the pipe, as well as under the water container. If you find any type of signs of dampness on the floor around the commode, look for leaks in the toilet rim and also container seals.
Know that hanging bathroom bowl deodorants increases the opportunities for obstructions.

How to prevent bathroom water damage


Water damage is unique in that it builds up over an extended period of time, eventually leading to outbreaks of mould, softening of walls and ceilings, cracks in sealant and tiles, and distortion of base floors and frames.



Bathroom water damage is incredibly common, as we often don’t realise it’s happening until something major happens to attract out attention, such as a bulge appearing in the ceiling or the sealant connecting your bath to the floor becoming cracked.



We spread a lot of excess water around in our bathrooms, which seeps into tiny pores and cracks in all sorts of surfaces where conditions make drying difficult. Besides actual surface water, the steam which billows from our hot showers and freshly-run baths takes its toll as well over time.



Any leaking fixtures, such as taps, showerheads, or toilets, allow water to seep into cracks on floors, walls, and tiles – where mould can begin to bloom and rot sets in.



If you are a concerned homeowner looking to keep your bathroom in tip-top shape for an upcoming inspection, sale, or simply for your own enjoyment, this article will teach you how to identify and repair risks associated with water damage in your bathroom.


  • 1. Keep your towel close to the shower/bath, and dry yourself off whilst still standing in the shower or bath. If you step out of the bath or shower, have a towel or bathmat on the floor for you to stand on. This stops excess water gathering on the floor and being splashed on walls.


  • 2. Make sure that the extraction fan is switched on. This sucks some of the steam out of your bathroom, preventing condensation build-up on walls, ceilings, and floors. If your fan is faulty or broken, have it replaced as soon as possible.


  • 3. If you think your toilet might be leaking, switch off the shutoff valve when you’re not using it. It can be difficult to spot toilet leaks sometimes, but if you hear a low, steady hiss coming from the tank, excess water is leaving the tank. Though this water is probably just going down the drain, any cracks or fissures in the bowl will cause small, constant leaks that can do significant damage to surrounding surfaces over time.


  • 4. Try and clean your bathroom at least once a week. This includes wiping down surfaces with a cloth and then drying them thoroughly once you’re done. This will prevent mould and rot from setting in and damaging the surfaces in your bathroom.


  • Check that sealant and grout are intact


    Grout and sealant are the materials which fix your bathroom fittings in place, such as shower cubicles, bathtubs, and tiles. Regular prolonged exposure to moisture and heat in the bathroom can cause grout to crack and wear out. Check the grout and sealant regularly to make sure it’s free of stains and rot. Use a cleaning solution to clean the grout when you are doing the housework, and dry it thoroughly when you’re finished.



    If you notice grout is missing or extensively damaged, you should remove any worn-out gout and clean the area thoroughly. Give it a good dry and let it sit for a bit, and then install new grout. This will prevent rot from spreading and stop your fixtures or tiles from shifting.


    Check regularly for leaking pipes or spouts


    If you see water dripping from a pipe or other fitting, you should have it repaired as quickly as you can. You can probably do it yourself by tightening the fittings or applying a plumbing putty or sealant.



    Even small leaks become progressively worse over time, and the water they leak can accumulate underneath the floor or behind walls. If you are unsure about the extent of a leak, you should contact a professional blocked drain plumber for diagnosis and repair.


    Check for leaks around the toilet and bath


    When a bath, shower cubicle, or toilet are installed they are caulked into the floor. It’s important that you check this caulking regularly to make sure that it’s in good condition. If the caulk becomes damaged, the fixtures will leak and moisture will accumulate. Eventually this can cause the fixtures to shift and damage the floor, leading to further water damage.


    Look for any signs of decay or rot


    When you’re using or cleaning your bathroom, keep an eye out for any indication that rot, mould, or other forms of decay might be setting in. If you notice stains on surfaces or sealant, you will need to take action.



    Make sure that there aren’t any loose tiles


    Tiles in shower cubicles are particularly prone to coming loose. Make sure that all the tiles in your bathroom are fitting tightly and are adequately caulked. If you notice loose or shifting tiles, remove them as soon as you get the chance, clean and dry the area, and replace the tiles. You can use the same tiles you removed, just make sure you clean and dry them thoroughly before you replace them.


    Check under the sink


    This is an important one. Make sure that you look under your sink occasionally to make sure that the pipes and fittings there are in good condition. If they aren’t, water can accumulate in this space and spread rot to other surfaces. It can also damage the foundations of the sink fitting and damage the floor.


    Install drain covers


    Drain covers have a very important place in every bathroom. They work by keeping large particles, such as dirt clumps and hair, out of the drains where they could cause blockages. You probably already have drain covers over your drains, so make sure that they are kept clean and clear of debris. This will prevent any blockages from occurring in the drain, which could cause leaks and internal flooding.

    https://blockeddrainplumbers.com/how-to-prevent-bathroom-water-damage


    How to Fix a Water Damage Bathroom

    Hopefully you enjoyed our post on Common Causes of Water Damage in a Bathroom. Thank you so much for taking a few minutes to browse our content. In case you enjoyed reading our article kindly do not forget to pass it around. Thanks a lot for going through it.



    Call Us Today

    Leave a Reply

    Your email address will not be published. Required fields are marked *